beccor  BECCOR
You are here: Home » Products » Woodbased Panel Production Line » MDF/HDF Production Line

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

MDF/HDF Production Line

  • HALLMARK

Availability:

MDF/HDF Production Line


MDF/HDF has a dense and smooth surface and a uniform core layer. It has good processing performance and is an ideal substitute for natural boards. It is the most widely used.

The MDF/HDF production line can be divided into two types: multi-layer press and continuous press. The multi-layer press can produce 8-25mm thick, and the continuous press can produce thin plates of 2-6mm and any thickness. Provide 4 feet, 6 feet and other multi-standard overall solutions.


What machines are required to install MDF/HDF Production Line?

Raw Material → Drum Chipper → Vibrating Scerrn → Preheating Disgester

 → Refiner → Fibre Drying section → Mechanical Forming Machine → Hot Press  → Cooling Line → Sanding Section → Packing



Raw material



1.Raw Material

Logs, harvesting and processing residues can be used to recycle old waste wood and non-wood raw materials such as bamboo, bagasse, wheat straw and other plant cellulose. The content of plant cellulose is more than 30%, and the moisture content is controlled at 40%~60%. Foliage, preferably single species.






Drum Chipper



2.Drum Chipper

Drum chipper/disc chipper, which cuts raw materials into wood chips of certain specifications. Qualified wood chips: length 16-30mm, width 15-25mm, thickness 3-5mm, uniform size.




Vibrating Screen



3.Vibrating Screen

Sorting wood chips, continue to cut the big ones to the required size.





Digester Machine


4.Digester Machine

The fibers are easier to separate, reducing power consumption, shortening the separation time, and increasing the plasticity of fiber raw materials. Cooking pressure 0.8-1.2Mpa, temperature 160-180 degrees Celsius, time 3-5min.



Fiber Preparation section

5.Fiber Preparation section

Thermal grinder grinds into fibers. Molten paraffin or other waterproofing agent is fed into and mixed with the fiber, and the adhesive is transported through the pipeline under a certain pressure to the fiber discharge pipe of the heat refiner to fully mix with the fiber.

The amount of paraffin wax applied is 1-2%, and the amount of sizing medium density board is 8-12%.




fibre Drying section 6. Fibre Drying section

The hot air transports the wet fiber from the dryer duct to the cyclone separator, the moist air is separated from the fiber, and the fiber is dried to the moisture content required by the process

Moisture content after sizing and before drying: 50%~60%, after drying 8~12%,Drying medium temperature 120~180℃

Drying outlet temperature: 50-70°C,Air velocity 20-30m/s.



Mechanic mat forming machine



7.Mechanic mat forming machine

The material is thrown by the throwing roller and falls evenly onto the conveyor belt of the paving line. Process requirements: uniform and stable density, consistent thickness, with a certain degree of compactness, to ensure sufficient thickness and size specifications. 



Hot Press

8.Hot Press Machine

Under the action of pressure and temperature, after a certain period of time, the slab is pressed into the density required by the process to become a raw board. There are multi-layer presses and continuous presses for hot presses.

Four stages of hot pressing process: ① slab air discharge ② temperature conduction ③ pressurization to the specified thickness ④ pressure relief and exhaust to shape



Cooling Line



9.Cooling Line

The temperature of the board after hot pressing is high, and the heat is not easy to dissipate when stacked directly. Need to be cooled to below 60°C before stacking or processing.



Sanding Section


10.Sanding Section

After cooling the raw board for 24~72 hours, sand it, sand off the pre-cured layer on the board surface.

Capacity:200000-500000

Cutting Width:≤2950mm

Cutting length:≤7500mm

Cutting height:≤230mm


packing



11.Packing

Then after inspection, grading, and stacking, it is sent to the warehouse by forklift.



Parameters of MDF/HDF Production Line


No. Item Parameters
1 Designed Capacity 300-1000 m³/d
2 Press Size 4-8 ft
3 Press Speed Max.1800 mm/s
4 Thickness Range 1.8-32 mm


MDF Production Line Video



Advantages of MDF/HDF Board Production Line


Consistency: MDF/HDF is manufactured in a controlled environment, which ensures that the product is uniform in density, thickness, and strength.

Cost-effective: The use of wood fibers as raw material is cheaper than solid wood, making MDF/HDF a cost-effective alternative to solid wood.

Versatility: MDF/HDF can be easily cut, shaped, and routed to create a variety of furniture, cabinetry, and decorative items.

Smooth surface: The surface of MDF/HDF is smooth and uniform, making it easy to paint, veneer, or laminate.

High strength: MDF/HDF has high strength and stiffness, making it ideal for applications that require structural support.

Environmental friendly: MDF/HDF production line can use recycled wood fibers and other environmentally friendly raw materials, making it a sustainable option.

Reduced waste: The production process generates little waste, and any waste produced can be reused in the manufacturing process.



Understanding the Different Types of MDF Manufacturing Equipment 


There are various types of machinery involved in MDF manufacturing, each serving a specific purpose:


  1. Material Handling Systems Material handling systems are responsible for transporting wood fibers to different processing stages. They include conveyors, hoppers, and storage silos.

  2. Pressing Machinery Presses play a vital role in compressing wood fibers and resin into dense sheets. Hydraulic and mechanical presses are commonly used in MDF manufacturing.

  3. Drying and Finishing Lines Drying and finishing lines are essential for removing moisture and applying coatings to MDF boards. These lines can significantly impact the final product's quality.


Customer case of MDF/HDF Production Line


plywood production line


Advanced Techniques for MDF Production Line


1.Innovations in Raw Materials One of the cornerstones of advanced MDF Press Line is the use of innovative raw materials. Manufacturers now employ not only wood fibers but also alternative sources like bamboo, bagasse, and even recycled wood. These materials offer increased sustainability and can impart unique properties to the final product.



2.Enhanced Fiber Processing Advanced MDF Press Line incorporates enhanced fiber processing techniques. These processes involve refining the wood fibers to a finer degree, resulting in a smoother, denser, and more consistent board. Fiber refinement technology has come a long way, allowing for greater control over the final product's quality.


3.Improved Binder Formulations The binders used in MDF production have seen significant improvements. New formulations are not only environmentally friendly but also provide better bonding and moisture resistance. This innovation ensures that advanced MDF can withstand a wide range of environmental conditions.


4.Precision Pressing Precision is key in advanced MDF production. Cutting-edge machinery and technology are employed to ensure that the boards are pressed with unparalleled accuracy. This precision results in boards that are flat, uniform, and free from defects.


5.Cutting-Edge Surface Finishing Advanced MDF production extends to surface finishing. Techniques like digital printing and embossing can create textures and patterns that mimic natural wood, enhancing the aesthetic appeal of the final product.


Why choose HallMark as your supplier?


1.Rich Experience and Professional Design

We have 19 years experience in Woodworking industry,also has many years exporting experience. Each equipment location,passage will be designed reasonably to meet safety production.


2.Competitive Price

HallMark has own factory,with the same configuration,the price is competitive.And we are familiar with the Chinese market,our suppliers provide high-quality cost-effective accessories.


3.Timely After-sale Service

We have over 15 skilled technicians engineers, 26 after-sales engineers will be sent to the customer's factory to assist in the installation and debugging of the Whole production line until it runs well,and asked for quick responses to customer questions within 8 hours.


4.One-stop Solution

We provide one-stop service, including market analysis and professional technical consultation,Short Cycle Press Line, Paper Impregnation Production Line, Wood Based Panel Production Line, Raw materials ,Equipment installation, personnel training,Professional after-sales service team,Renovation of old equipment,make turnkey projects.


5.Quality Control

Strict quality control of equipment in production and before leaving the factory, and a complete quality management system for purchased parts.Customers are always welcome to make videos or come to the factory to know the production status.


6.Customized

HallMark's engineer team will design the layout according to customer’s factory space and production requirements.


FAQ of MDF/HDF Flooring Production Line



1.What is MDF/HDF flooring?

MDF (Medium-Density Fiberboard) and HDF (High-Density Fiberboard) are engineered wood products made from wood fibers and resin. They are commonly used as a base material for flooring.


2.What is an MDF/HDF Production line?

An MDF/HDF flooring production line is a series of machines and equipment used to manufacture MDF/HDF flooring products from wood fibers and resin.


3.What are the components of an MDF/HDF Production line?

A typical MDF/HDF flooring production line consists of several machines, including a fiber preparation system, a fiber drying system, a fiber blending system, a forming machine, a pre-press machine, a hot press machine, a sanding machine, and a coating machine.


4.How does an MDF/HDF Production line work?

Wood fibers are prepared, dried, and blended with resin. The mixture is then formed into panels using a forming machine and pre-pressed to remove excess moisture. The panels are then placed in a hot press to form the MDF/HDF flooring product. After the pressing, the flooring is sanded, coated, and prepared for packaging.


5.What are the benefits of an MDF/HDF Production line?

An MDF/HDF flooring production line enables manufacturers to produce high-quality flooring products in large quantities, with consistent quality, and at a lower cost. It also helps to reduce labor costs and improve efficiency.


6.What are the factors to consider when buying an MDF/HDF Production line?

The factors to consider when buying an MDF/HDF flooring production line include the capacity of the line, the quality and reliability of the machines, the cost of the line, the availability of spare parts and technical support, and the manufacturer's reputation.


7.What are the maintenance requirements of an MDF/HDF Production line?

An MDF/HDF production line requires regular maintenance to ensure optimal performance and longevity. This includes cleaning and lubrication of the machines, regular inspections, and replacement of worn-out parts.


Previous: 
Next: 

LET'S WORK TOGETHER TO ANTICIPATE AND MEET YOUR CUSTOMERS' EXPECTATIONS.

If there is anything you're not sure about or you just need a hand getting set-up you can call or email us.

Contact Us

  info@hallmarkleader.com
   +86-13921078680
    Wujin District, Changzhou City, Jiangsu Province, China

Products

Quick Links

Follow Us

COPYRIGHT © 2023 HALLMARK. ALL RIGHTS RESERVED.